![](https://anrd.com/wp-content/uploads/2023/08/60mm-fiber-optic-protection-sleeve-1.webp)
60mm Fiber Optic Protection Sleeve
Splice holder could hold 40mm to 60mm heat shrinkable protection sleeves with 2.5mm diameter.
- Protect connection point
- Easy to operate
- reducing the risk of fiber damage during installation
- Free sample in stock
Introduction
60mm splice protectors are the industry standard for durable and lasting protection of single-fiber splices in field installations. These micro-sleeves provide the known reliability of Fujikura sleeves in the smallest possible lengths. This easy and cost-effective method is a great alternative to recoating. 60mm fiber splice protectors are sold per 100 pieces.
This 60mm Fiber Protection Sleeve is designed for single fiber applications and accommodates up to 1.4mm coated fibers. The color is clear (transparent).
Heat Shrinkable Fiber Optic Splice Protection Sleeves provide vital protection at the fused juncture between two fusion spliced optical fibers. In addition to providing a substitute for the original fiber optic cable jacket, splice protection sleeves provide a degree of rigidity that prevents the spliced area from bending or flexing.
Feature
- Single Fiber splice sleeve
- 60 mm length
- Steel Core Support using polished Stainless Rod
- Clear Transparent outer Tube
- roHS and Reach Compliant
- Inner tube material is made by EVA (ethylene-vinyl acetate
Application
- Wall-mount
- Strand-mount
- Pedestal
- Underground
- Pole-mount
Specification
Parameters | Value |
---|---|
Length of Tube | 60mm |
Inner Tube Diameter | 2.4mm |
After Recover Diameter | 3mm |
Outer Tube Diameter | 4.7mm |
Steel Needle Diameter | 1.2mm |
Working Temperature | -55°C~100°C |
Tensile Strength | 18MPa |
Dielectric Constant | 2.5 |
Elongation at Break | 700% |
Longitudinal Change | ±5% |
Density | 0.94g/m³ |
Eccentricity | 105 |
Dielectric Strength | 25kV/mm |
Volume resistance | 1015Ω |
Minimum Shrink Temperature | 120°C |
Minimum Fully Recovery Temperature | 100°C |